PRx Performance Profile 90" Squat Rack with Multi-Grip Bar Скачать руководство пользователя страница 7

Страница: 7 / 12

Attach Multi-Grip Bar To Uprights

Lay uprights on the ground facing upward (with space between for the multi-grip bar).

Lay the multi-grip bar (#4) flat on the ground between the tops of the uprights as shown below. The

top of the uprights will not have a plastic plug.

Using a 3 1/2” hex head bolt (#14), two 5/8” washers (#11), and one 5/8” Nyloc nut (#12) connect the

bottom hole of the multi-grip bar to the third hole down from the top of the upright. Hand tighten then

repeat with the next upright.

Attach the top of the multi-grip bar to the upright using a 4” hex head bolt (#13), two 5/8” washers

(#11), and one 5/8” Nyloc nut (#12). Hand tighten and repeat with the other upright.

Leave the top bolts loose, but tighten bolts in the bottom holes using a 15/16” open ended wrench

and socket. The top bolts will need to be removed shortly when you attach the rack to the linkage

arms.

Team lift the rack into place (approximately 20” away from the wall), in order to begin attaching

linkage arms.

Содержание Profile 90" Squat Rack with Multi-Grip Bar












