3
Configuration
Full Cage 95 Full Cage 81
Item #
Description
QTY
QTY
1
Upright, 95” or 81”
4
4
2
Crossmember, 42”
5
5
3
Angle Foot
2
2
4
42” Pull-Up Bar
1
1
5
Spreader Floor Plate
1
1
6
5/8” x 4 1/2” Hex Bolt
6
6
7
5/8” x 4 1/4” Hex Bolt
20
20
8
5/8” Flat Washer
28
28
9
5/8” Nylock Nut
26
26
All questions, feedback, and return information should be sent to: [email protected] or
call us at 1-701-566-0452
LIMITED LIFETIME WARRANTY: This product is warranted by PRx Performance LLC, to the original user-owner only, against
defective materials or workmanship for the lifetime of the product. During the warranty period, or “lifetime” of the product,
at the discretion of PRx management, if the product is found to be defective, it will be repaired or replaced without charge.
This warranty does not cover defects in the product caused by ordinary wear and tear, abuse, misuse, overloading, accident
(including shipping damage), improper maintenance or alteration. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANT ABILITY OR ANY IMPLIED WARRANTY OF
FITNESS FOR A PARTICULAR PURPOSE OF THIS PRODUCT. PRx PERFORMANCE INC. SHALL NOT BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES. Email [email protected] or call 701-566-0452. See full warranty at
www.prxperformance.com
WARNING: SERIOUS INJURY OR DEATH COULD OCCUR IF PRECAUTIONS ARE NOT TAKEN.
Build Limitless
®
Full Cage
All Parts & Tools Needed
Tools Needed
1. 15/16” Open-End Wrench
2. 15/16” Socket
3. Socket Wrench
4. Step Stool
5. Second Person
Additional Items Needed
(not included):
1. Floor mounting hardware
Assembly Notes:
• 4 1/2” bolts are used on the pull-up bar and angle foot only. 4 1/4” bolts are used
everywhere else.
• Flat washers are only needed where a bolt head is directly contacting an upright,
an angle foot, or spreader plate.
