5
6-Post Rack Assembly Instructions
1. Start with the middle portion of the rack, making sure the logo is on the back side of the
upright (Figure 1).
2. When attaching the crossmembers, be sure to orient them correctly (see Min. and Max. in
Figure 1).
3. Assemble frame. Secure hardware but do not to fully tighten.
NOTE: Do not overtighten
any of the bolts as this could result in deformed uprights and make it difficult to
assemble additional components.
5
1. First make sure all your components and hardware are accounted for, according to the Parts List on
page 3. Make sure you look under the correct configuration.
2. Start with the middle portion of the rack, making sure the upright logo is on the back side of the upright.
(see figure 1)
3. Assemble Frame. BE CAREFUL not to overtighten any of the bolts as this could result in deformed up-
rights and make it difficult to further assemble any additional components.
[email protected] 701-566-0452
Start of Frame Assembly
Figure 2
2
8
9
10
10
Figure 1
Logo on back side of middle uprights.
Min.
Max.