PRÜFTECHNIK FLUKE DBT10, Руководство по эксплуатации

Страница: 6 / 10

Ultrasonic transmitter DBT10 Device function and setup
6
SONOCHEK 09.2018
2 Device function and setup
2.1 Intended use
The ultrasonic transmitter DBT10 can be used to detect leaks at windows, doors, cabins,
climatic test cabinets, vehicles or containers. The ultrasonic transmitter sends signals in the
ultrasonic range. If it is positioned in a closed system to check for leaks, the signals pass
through unsealed points in the system outwards and can be detected there by the SONOCHEK
ultrasonic measuring device. Two levels of sound intensity can be selected.
Any use other than the intended use is prohibited and may lead to personal injury or physical
damage. PRUFTECHNIK is not liable for damage, also to third parties, caused by the improper
handling of the ultrasonic transmitter.
2.2 Displays, operating keys and other device parts
No. Function of displays, operating
keys and device elements
1 Integrated ultrasonic transmitter
2 LEDs for displaying the sound
intensity
3 Touch button: On/off: press for at
least 3 seconds
Change the sound intensity:
press briefly
4 Protective cover
Back side
of the
device Battery compartment cover,
nameplate (not shown)
The nameplate is located on the back side of the device and is to be kept available in cases of service.
1
3
4
2