8
EN
•
Filling the water tank
Remove the rubber plug from the filling nozzle and pour the well-mixed solution into the wa
-
ter tank. Always make sure to keep the level below the
Max
indication to prevent overflow.
•
Sowing the seeds and installing the baskets
Soaking the seeds in warm water for about 1 hour beforehand is recommended to ensure
normal sprouting. After that, insert each seed into a grow sponge, and each sponge into a
grow basket. Lastly, place each basket into a planting hole in the tank cover.
The control panel
This button turns on the plant grower in
normal
mode. The light panel will run a
14h-on/10h-off cycle that repeats itself every 24h.
This button turns on the plant grower in
enjoy
mode. The light panel will decrease
light intensity, and run a 12h-on/12h-off cycle that repeats itself every 24h. This cycle
will start when the button is pressed while the plant grower is turned off.
This button turns on the plant grower in
grow
mode. The light panel will increase
light intensity, and run a 16h-on/8h-off cycle that repeats itself every 24h. This cycle
will start when the button is pressed while the plant grower is turned off.
