Proxxon OZI 115, Руководство пользователя

Страница: 5 / 7

- 5 -
Dress properly. Do not wear loose
clothing or jewelry. Contain long
hair. Keep your hair, clothing, and
gloves away from moving parts.
Loose clothes, jewelry, or long hair
can be caught in moving parts.
Avoid accidental starting. Be sure
switch is off before plugging in.
Carrying tools with your finger on the
switch or plugging in tools that have
the switch on invites accidents.
Remove adjusting keys or
wrenches before turning the tool
on. A wrench or a key that is left
attached to a rotating part of the tool
may result in personal injury.
Do not overreach. Keep proper
footing and balance at all times.
Proper footing and balance enables
better control of the tool in unexpec-
ted situations.
Use safety equipment. Always wear
eye protection. Dust mask, non-skid
safety shoes, hard hat, or hearing pro-
tection must be used for appropriate
conditions.
Tool Use and Care
Use clamps or other practical way
to secure and support the work-
piece to a stable platform.
Holding
the work by hand or against your
body is unstable and may lead to loss
of control.
Do not force tool. Use the correct
tool for your application.
The correct
tool will do the job better and safer at
the rate for which it is designed.
Do not use tool, if switch does not
turn it on or off.
Any tool that cannot
be controlled with the switch is
dangerous and must be repaired.
Disconnect the plug from the power
source before making any adjust-
ments, changing accessories, or
storing the tool.
Such preventive
safety measures reduce the risk of
starting the tool accidentally.
Store idle tools out of reach of
children and other untrained
persons.
Tools are dangerous in the
hands of untrained users.
Maintain tools with care. Keep
cutting tools sharp and clean.
Properly maintained tools, with sharp
cutting edges are less likely to bind
and are easier to control.
Check for misalignment or binding
of moving parts, breakage of parts,
and any other condition that may
affect the tools operation. If dama-
ged, have the tool serviced before
using. Many accidents are caused by
poorly maintained tools.
Use only accessories that are
recommended by the manufacturer
for your model.
Accessories that may be suitable for
one tool, may become hazardous
when used on another tool.
SERVICE
Tool service must be performed
only by qualified repair personnel.
Service or maintenance performed by
unqualified personnel could result in a
risk of injury.
When servicing a tool, use only
identical replacement parts. Follow
instructions in the Maintenance
section of this manual.
Use of
unauthorized parts or failure to follow
Maintenance Instructions may create
a risk of electric shock or injury.
SPECIFIC SAFETY RULES
Hold tool by insulated gripping
surfaces when performing an
operation where the cutting tool
may contact hidden wiring or its
own cord. Contact with a „live“ wire
will make exposed metal parts of the
tool „live“ and shock the operator.
Some material may produce harmful
or toxic dust (i. e. lead containing
paint,some kinds of wood or metal)