Proxxon MIS 1, Руководство пользователя

Страница: 4 / 6

- 7 -
Gear ration 93:1
Friction clutch 5-step,
0,25 bis 1,0 Nm
Torque with the
frictlon clutch
switched off
(step 6)
2 Nm
Weight: 400 g
Noise:
≤
70 dB (A)
Please do not dispose off the machine!
For your safety, always wear hearing
protection while working!
Operation
Clamping, changing tools
Disconnect the machine (rom the power pack
before changing tools.
Insert the drill chuck key 2 (Fig. 2) into the drill
chuck (1) and turn in direction „A“ to open the
chuck.
Insert the tool (3) into the drill chuck until it bot-
toms and turn the drill chuck key in direction „B“
to clamp the tool.
Always clamp the tools securely.
Adjusting the torque
Turn the adjustment ring 1 (Fig. 3) to the desired
torque value.
Step 1 = 0,35 Nm
Step 5 = 1,0 Nm
Step 6 = 2 Nm (clutch OFF)
Connecting the machine
Insert the plug (Fig. 4) into the socket on the
power pack.
Working with the machine
Danger of injury!
Replace worn tools in due time.
Adjust the correct torque for the werc on the
adjustment ring (Fig. 3).
Torques which must be strictly observed should
be determined with a torque wrench.
Attach the screwdriver to the screw or nut and
hold it as shown in Fig. 5 cr 6.
Operate the tumbler switch „A“ or „B“ (Fig. 5
and 6).
Press A = clockwise rotation
Press B = counter-clockwise rotation
Disposal:
Please do not dispose of the device in domestic
waste! The device contains valuable substances
that can be recycled. If you have any questions
about this, please contact your local waste
management enterprise or other corresponding
municipal facilities.
Attention!
Attention!
Attention!
Note
EC Declaration of Conformity
Name and address:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation: MIS 1
Article No.: 28690
In sole responsibility, we declare that this product
conforms to the following directives and normative
documents:
EU EMC Directive 2014/30/EG
DIN EN 55014-1 / 05.2012
DIN EN 55014-2 / 06.2009
DIN EN 61000-3-2 / 03.2010
DIN EN 61000-3-3 / 6 2009
EU Machinery Directive 2006/42/EG
DIN EN 62841-1/07.2016
Date: 29.09.2017
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identical with
the signatory.
GB