- 7 -
Important:
Always clamp tools securely.
Changing the drill chuck
Note:
The drill chuck has a
M8 x 0.75 thread.
1. Fully open drill chuck.
2. Block shaft with an Allen key
(4 mm) (Fig. 3).
3. Turn to left to release drill chuck,
turn to right to tighten.
Working with the machine
Important:
Never work without safety goggles
when grinding.
Do not work with bent drills or
shafts.
Change blunt drills in good time.
Note:
Do not overload machine. Always
maintain sufficient speed to ensure
that the motor is ventilated.
EC Declaration of conformity
We declare on our own
responsibility that this product
conforms to the following EC
guidelines:
EC EMC guideline
2004/108/EG
DIN EN 55014-1 / 06.2007
DIN EN 55014-2 / 08.2002
DIN EN 61000-3-2 / 10.2006
DIN EN 61000-3-3 / 06.2006
EC low voltage guideline
2006/95/EG
DIN EN 60745-1 / 06.2007
DIN EN 60745-2-1 / 06.2007
EC machine guideline
2006/42/EG
DIN EN 60745-1 / 06.2007
DIN EN 60745-2-1 / 06.2007
03.06.2008
Jörg Wagner
PROXXON S.A.
Machine Safety Division
Содержание Micromot Colt 2
Страница 1: ... Manual COLT 2 ...
Страница 2: ... 2 4 6 8 10 12 14 16 18 20 22 24 26 ...
Страница 3: ... 3 Fig 1 Fig 3 Fig 2 ...
Страница 29: ... 29 Ersatzteilbild ...