Proximity
UVC-CM
HOW IT WORKS
REV H /2021
P4
Disinfection
When positioned and plugged into power, your UV-Clean device will begin working.
It has
pre-set operation times.
Cleaning cycles operate autonomously throughout the life of the product.
Motion-sensor technology pauses cleaning cycles and relays the need to run a cleaning
cycle when people come and go.
Clean Time
: The period of time the device is
producing UV-C. Factory set to 5 minutes.
No Motion Time
: The length of time the device will
allow to pass before producing UV-C after the
motion sensor has communicated an absence of
movement. Factory set to 4 minutes.
Wait Time
: Downtime scheduled between cleaning
cycles that are unrelated to motion sensor activity.
Factory set to 60 minutes.
Operation Timing
16.0”
10.0”
22.0”
5.0”*
4.3”
* example height
0
o
15
o
Rotational Adjustment for Tilt
-
Max.
Disinfection or reduction requires the light to be in contact with the surface for at least 5 minutes initially, and then
provides continual reduction if allowed to remain on with regular disinfection cycles, except when motion is detected.
Independ
e
nt product testing was performed by NSF International Labs, July, 2019. A full report can be downloaded at:
https://proximitysystems.com/wp-content/uploads/2019/07/NSF-Results.pdf
