Proximity
UVC-SA
QUICK GUIDE
REV G /2021
P1
Check List for Quick Set-Up
Attach bracketry according to instructions found in this guide. See contents below.
Attach the power cable to the circular jack on the back of the UV-Clean unit.
Power the device by plugging in the opposite end of the power cable to the
supplied adapter, or another
USB 3.0
device with output power of 900 mA.
Set-up is complete.
4
1. Status
Indicator
2. Motion Sensor
3. Push Button
For Task Light
5. Micro-USB
Data
Receptacle
Detection for
UV auto shut-o
ff
feature
Control the on/o
ff
of the LED task Light
DC 5V supply
included, 5mm jack
Retrieve cleaning
cycle information
stored internally
4. Power
Receptacle
Blue Blink = Bulb Failure
White = On, Stand By
Blue = Cleaning
2
1
Front View
UV-C Unit
White = On, Stand By
Blue = Cleaning
Blue Blink = Bulb Failure
A PC operating Windows 7 or newer.
A USB port, 3.0 or newer if using in place of supplied power adapter.
System Requirements
Download UV-Clean Audit Software here: https://uvclean.proximitysystems.com/latest-software/
3
5
4
Rear View
Power Cable
5mm , USB-A
DC 5V Power Supply
Micro-USB
Data Cable
3/32” Allen Key
Short
Screw
(X2)
Stand
Tray
Cable Tie
