20
1. Complete peripheral connections (with a
computer, VCR,etc.) before turning on the
projector.
2. Connect the projector’s AC power cord into
AC outlet. The POWER indicator turns red.
3. Press the POWER button on side control or
on the remote control. The POWER indicator
becomes green and the cooling fans start to
work. The preparation display appears on
the screen.
4. If the projector is locked with a PIN code, a
PIN code input dialog box appears. Enter
the PIN code as instructed below.
Caution on handling the PIN code
If you forget your PIN code, the
projector can no longer be started.
Take a special care in setting a
new PIN code. Write down the
number in a column on page 71 of
this manual and keep it properly.
Should the PIN code be missing
or forgotten, consult your dealer or
service center.
Enter a PIN code
Press OK button, press
button to select a
number, then press OK button, select a number
and enter it to the PIN code box, then number
changes to "*", automatically move the curor
to next box. If you fixed an incorrect number,
press MENU button to reset it again.
Repeat this step to complete entering a three-
digit number.
After entering the three-digit number, move the
cursor to “Set”, then you can start to operate
the projector.
If you entered an incorrect PIN code, the “PIN
code” and the number (***) turn red. PIN code
will be reset within one second automatically,
Enter the correct PIN code all over again.
What is PIN code?
PIN (Personal Identification Number) code is a
security code that allows the person who knows
it to operate the projector. Setting the PIN code
can prevent unauthorized use of the projector.
A PIN code consists of a three-digit number.
Refer to the PIN code lock function in the
"Expand" "Security" menu on pages
47 for PIN
code lock operation of the projector.
Move the cursor to "Set", and press "OK".
ENTER
-----
Input PIN code
Back
PIN Code
Set
Cancel
ENTER
Move Select Reset
PIN Code
Set
Cancel
*
Basic operation
Turn on the projector
Note:
● When the logo select is set to be "Off", the
logo will not be displayed on the screen.
