Configuration
QB.11-R Installation and Management
QoS (Quality of Service) Parameters (BSU only)
112
Configure the following parameters:
•
PIR Table Reference Index:
Select one of the possible PIRs that have been previously configured from the drop-
down box.
•
PIR Priority:
This priority per rule defines the order of execution of PIRs during packet identification process. The PIR
priority is a number in the range 0-63, with priority 63 being executed first, and priority 0 being executed last. The PIR
priority is defined within a QoS class, and can be different for the same PIR in some other QoS class. If all PIRs within
one QoS class have the same priority, the order of execution of PIR rules will be defined by the order of definition of
SFCs, and by the order of definition of PIRs in each SFC, within that QoS class.
•
Entry Status:
This field is always set to
Enable
.
Click
Add
to add the entry. The new entry will be added to the PIR list, taking up the next sequential index entry.
You may delete any PIR entry by clicking on the
Status
drop-down box and selecting
Delete
.
Associate a New SFC with a QoS Class
On the QoS Class screen, click the
Details
button next to Class with which you want to associate a new SFC. Then click
the
Add Table Entries
button under the
SF Details
heading to add a new SFC and associate it to this QoS Class.
