Safety Information
AP-4000MR Safety and Regulatory Information
4
Safety Information
These products have been evaluated to, and comply with, IEC60950: 1999.
When using this device, basic safety precautions should always be followed to reduce the risk of fire, electrical shock,
and injury to persons, including the following:
• All products are intended to be installed, used, and maintained by experienced telecommunications personnel only.
• These products have been evaluated for outdoor use.
• Operate and install these products as described in this manual. Equipment must be installed and used in strict
accordance with the manufacturer's instructions as described in the user documentation provided.
• Installation of these products must conform to local regulations and codes.
• Use only the AC/DC power supply adapter provided. For replacement, contact your local supplier or distributor.
WARNING: This equipment is intended to be grounded. A 10 AWG earthing conductor at a minimum is to be
used for this purpose.
• Do not connect or disconnect the power cable to the equipment when the power injector is plugged into an AC power
outlet.
• To avoid the risk of electric shock from lightning, do not use this product during an electrical storm.
• When using this product with external antenna, see the installation documentation provided with the antenna system.
• No user serviceable parts; all repairs and service must be handled by a qualified service center.
• Do not remove or alter the Marking label provided on these products.
