Chapter 2 Getting Started
2.4.3 Installing Battery for Pad
Make sure to power off the device first before you start installing the battery.
Step 1.
Slide to unlock the left-side battery switch with your left hand. See
the Figure below.
Step 2.
Use your left hand to push the right-side sliding tab to the right and
long press on it and hold it.
Step 3.
Use a fingertip of your right hand to remove the battery from the slim
opening located under the Camera.
Step 4.
Replace a new battery onto the back of Pad and the right-side
locking switch snaps into place automatically.
Step 5.
Slide the left-side battery switch to the right to secure and lock up the
replaced battery.
Note 1:
The factory default battery cycle life guarantees to retain 80 percent of its original
capacity after the battery has been charged and discharged for 300 times.
Note 2:
Batteries are consumerables and the limited warranty for MH-5106 battery is
1
year
only.
MH-5106 SERIES USER MANUAL
Page: 2-11
Step 1.
Use your left hand to
slide to unlock left-side
battery switch.
Step 2.
Push sliding tab to
the right side
and long press
on it and hold it.
Step 3.
Use a fingertip of your right hand
to remove the battery from the slim
opening.
Step 4.
Replace a new battery onto back
of Pad and the right-side locking
switch snaps into place
automatically.
Step 5.
Slide the left-side
battery switch to the
right to secure and
lock up the replaced battery
to complete.
