14
www.prowise.com
© Prowise B.V.
User Documentation Prowise Mobile Lift
Version 2016
4. Only connect the Mobile Lift to an earthed electrical socket.
5. Make sure the power cable is not placed in an aisle and that the Mobile Lift is not rolled over the
power cable.
6. The Mobile Lift must be initialized after it has been moved. See 4.2.1 for more instructions.
7. The Mobile Lift must be initialized after it has not been used for a long time. See 4.2.1 for more
instructions.
8. The software includes a safety feature that stops the movement of the Mobile Lift if the display touches
something when it is moving upwards or downwards. Next, the display moves 10 mm in the opposite
direction. Afterwards, the Mobile Lift can be used again, but it must first be initialized. See 4.2.1 for
more instructions.
4.2.1 Initializing the lift
Photograph 5: Lift operating buttons
1. Keep the button pressed until the lift has almost reached the lowest position.
2. Release the button.
3. Press the button again and keep it pressed. The lift continues to the move to the lowest position.
•
Only place the Mobile Lift on a flat and level floor.
•
Do not place the Mobile Lift in the vicinity of water. Do not place any liquids on or close to
the Mobile Lift.
•
Make sure all the ventilation openings are uncovered, so that heat can be released.
