Moving the lift
Take the following guidelines into account when moving the Prowise iPro Toddler and Tilt Lift:
-
Set the lift in the lowest position and ensure that the screen is in a vertical position so that it can
be moved.
-
Roll up the power cord to ensure it is not dragged across the floor or is left in the lift’s walkway.
This mitigates the danger of stumbling as well as damage to the connecting cable.
-
Make sure that no objects are left or persons are within the lift’s walkway.
-
At least two people should be on hand to move the lift.
-
Only move the lift over a stable, flat surface.
-
Ensure that the lift does not come into collision with anything while being moved. This prevents
damage to the lift, the touch screen attached to it and the surrounding area.
-
The lift must be initialised after being moved. This prevents damage and extends the lifespan of
the lift.
User manual
iPro Toddler/Tilt lift
14
