Prowinch PWHC1000i, Руководство пользователя

Страница: 33 / 64

Installation
29
Version 1.0
| 29 |
OPERATION
Qualified Operator
Safe and efficient operation of hoist requires an operator who displays caution and good judgment. The operator
must be fully alert, focused, and aware of surroundings.
Job must be strictly carried out under the good practices defined by international and national safety standards, such
as ANSI, OSHAS and ASME.
Operator training must be provided to ensure proper operation of equipment in compliance with instructions provid-
ed by equipment manufacturer and the provisions of ASME B30.
•
Cannot read, understand and speak language of security labels, ID Plate and User Manual of equipment.
•
Does not meet legal age requirements.
•
Has visual or hearing impediments.
•
Experiences mental, heart, or other illnesses that could interfere with safe operation of equipment.
•
Has not been trained for use of hoist.
•
Has not received User Manual for exact equipment.
•
Has not demonstrated qualifications through a practical operation of hoist.
This hoist must not be operated by someone who:
Install Trolley Into Beam (models with trolley)
1.
Install trolley at end side of beam and slip trolley which has already been connected with hoist to
the appropriate place. This is the preferred method.
2.
If first method is unavailable:
•
Unload brake stopper from hole A on suspension pin,
and insert it into hole Insert cotter pin again and bend it
completely.
•
Pull side plate S and G outside, then lift trolley until
orbit wheel and orbit surface are in same horizontal posi-
tion. Put orbit wheel of side plate G onto surface of orbit.
•
Hold side plate G and stop it from dropping from
orbit. Firmly push side plate S and put its orbit wheel onto
surface of beam.
•
Unload brake stopper from hole B and insert into hole
A. Do not forget to bend cotter pin.