USB3.0/eSATA/1394b-to-SATA II RAID Subsystem
8
Quick Setup Guide
1.3 Disk Drive Status Indicators:
Every Drive Carrier has 2 status indicator lights. One indicator light is Disk Fault
Indicator. When this light is
GREEN
the disk is powered on and everything is
functioning normally. When the Disk Fault Indicator light is
RED
, the drive has failed
or a drive error has occurred which requires the user’s attention.
The other status indicator light is the Disk Access Indicator. When the hard disk drive
is busy or being accessed, this light will flash
BLUE
.
1.4 Disk Drive Installation Steps:
1.
To remove the disk tray from disk slot, make sure it is in unlocked position (lock
groove is vertical). Then press the Carrier Open button.
2.
The tray handle will flip open. Pull out the disk tray.
3.
Place the disk drive in the disk tray. Make sure the holes of the disk drive align
with the holes of the disk tray.
4.
Tighten the mounting screws to secure the disk drive into the disk tray.
5.
Insert the disk tray with disk drive in the disk slot.
6.
Close the tray handle until the latch click into place.
