Proware EN-3160A6-PDC, Руководство пользователя

Страница: 19 / 21

NAS System
User’s Manual
19
3.3 Installing Hard Drives
This section describes the physical locations of the hard drives supported by the
subsystem and gives instructions on installing a hard drive. The subsystem supports
hot-swapping allowing you to install or replace a hard drive while the subsystem is
running.
Each Drive Carrier has a locking mechanism. When the Lock Groove, which is located in
carrier open button, is horizontal, the Drive Carrier is locked. When the Lock Groove is
vertical, the Drive Carrier is unlocked. Lock and unlock the Drive Carriers by using a flat-
head screw driver.
3.3.1 Installing 3.5” Disk in a Disk Tray
a. Make sure the lock indicator is in unlocked position. To pull out a disk tray,
press the tray open button.
b.
Pull out an empty disk tray. Pull the lever handle outwards to remove the
carrier from the enclosure.
c.
Place the hard drive in the disk tray.
Tray
Open
Button