ProVista Technology TSW600 Basic, Руководство по эксплуатации

Страница: 12 / 16

8 Fault and troubleshooting
Fault Reason Remedy
Red LED illuminate at
the beginning of start System is warming up Wait for 3-5 seconds, it will be ok
Low voltage of battery
protection(Voltage of battery
is lower 10.5V) Switch off consumer device, charge
battery
Fault battery Change battery
Alarm
Battery isn’t connect tightly Cleaning and reconnect
Over load protection Restart inverter, if the problem can’t
be solved after restart, reduce the
load or change a powerful inverter
Deep discharge
protection(Voltage of battery
lower than 10V) Charge the battery
Red LED permanent
illuminate
Over temperature protection Cleaning the housing of inverter,
cool it
Noise Fan switched on
z
Wait until the temperature
conditions have normalized
z
Reduce the load of consumer
devices
9