Provision ISR DAI-390IP04, Руководство пользователя, Страница: 12 / 52

Page 6 IP CAMERA USER MUANUAL
IP address: 192.168.226.201
Subnet Mask: 255.255.255.0
Gateway: 192.168.226.1
HTTP: 80
Data port: 9008
When use the IP-CAM for the first time, you should connect the device with the above
default settings.
Step 1: Manual setup the IP address of the PC. The network segment should be as same
as the default settings of IP-
CAM. Right click “My Network Places” icon on the
desktop
 select “properties” as shown in the left figure. Right click “Local Area
Connection” at the popup window, and then select “property” as shown in the right
figure.
Select “Internet Protocol (TCP/IP)” in the “General” tabs  click “properties” 
manual
input network address information of the PC in the pop up window.
Step 2: Open the IE browser, input the default address of IP-CAM and confirm, the IE
browser will download Active X control automatically. If IE browser can’t download
Active X control, please refer to Q4 of chapter 8.
Step 3: After downloading Active X control, the login dialog box will pop up.
Step 4: Input user name and password in the login dialog box and
click “OK” button
to
enter into the live interface where you can manage the IP-CAM.