Page 19
IP CAMERA USER MUANUAL
4.4.3
NET Traversal Configuration
In this interface, user can access to network without dynamic domain name and port
forwarding by enabling NET transit.
1.
Enter into “Network Configuration”
“NET traversal Config”. Refer to
Fig 5-12:
Fig 5-12 Transit
2. Check “transit enable”. Then save the setting.
3. Input www.upnpicp.com in IE address; download and install Active X. Then a window
shows up as Fig 5-13:
Fig 5-13 Login
4. Input the only device ID of the IP-CAM or user-defined name. And then input user
name and password.
Note: The default user name and password are “admin” and “123456”
respectively.
4.4.4
Server Configuration
Enter into “Network Configuration”
“Server Config”. Please refer to
Fig 5-14:
1. Check “Do you want IP Camera to connect Server.
2. Check the IP address and port of the transfer media server in the ECMS/NVMS. Then
enable the auto report in the ECMS/NVMS when adding a new device. Then input the
remaining information of the device in the ECMS/NVMS. After that, the system will
auto allot a device ID. Please check it in the ECMS/NVMS.
Содержание DAI-380IP04
Страница 52: ...Page 47 IP CAMERA USER MUANUAL Notes...
Страница 53: ...Page 48 IP CAMERA USER MUANUAL...