Auto power down
The screen will be at full brightness while firing. Af-
ter 15 seconds with no button presses, the screen
will dim. Four (4) minutes after the last button
press, the screen will fade out and the device will
go to sleep mode. Pressing any button will turn the
device and display back on.
ADDITIONAL INFORMATION
Low-profile 510 Connector
The XPV/XPV Mini has a non-adjustable atomizer
connector pin. If the atomizer device does not con-
tact the connector pin correctly, the XPV/XPV Mini
will give a “Check Atomizer” error. Check for liquid
pooling in the pin area, and occasionally wipe the
connector clean of juice and condensation. DO NOT
OVERTIGHTEN ATOMIZERS!
Most atomizers can screw flush with the connec-
tor but those that have center pins that extend
far below outer threading may bottom out. Do not
force the atomizer to screw down, damage to the
connector’s insulator may result.
Maintenance
The XPV/XPV Mini requires no regular mainte-
nance. The device should operate trouble-free
through the life of the battery. Please take care not
to allow e-liquid, water or other foreign substances
to enter the device through the controls, USB port,
etc. Casing can be cleaned with a dry or damp cloth
if needed. Do not use abrasive or caustic cleaning
products.
The display screen is protected by a plastic cover.
Clean this cover with a microfiber lens cloth. Blow
off any foreign objects or dust on the surface first,
or scratching could result.
Occasionally, check the tightness of the screws in
the top and bottom of the casing.
Replacing battery
The battery of the XPV/XPV Mini is connected
with a push connector. It can be replaced without
special tools. This is intended to only be done
when the battery reaches the end of its life. New
batteries with appropriate connectors are available
from Protovapor. Instructions will be provided with
new batteries. Protovapor will install new batteries
purchased from us free of charge (customer covers
shipping).
LIMITED WARRANTY
The XPV/XPV Mini is covered for a period of 90
days from purchase against defects in workmanship
and materials. Internal components including the
DNA 20D board are covered for a period of 1 year
from purchase.
Repairs
Repairs on all components of the XPV/XPV Mini
are available from Protovapor.
SPECIFICATIONS
Output wattage:
7-20 watts
Output voltage:
3.0* to 8.3 volts
Output current:
6 amps max
Atomizer resistance:
0.6** to 3.3 ohms
Efficiency:
93%
Battery:
XPV standard - 2900mah Panasonic high-drain
18650
XPV optional - 1600mah AW IMR 18650
XPV optional - 2000mah AW IMR 18650
XPV Mini standard - 700mah AW IMR 18350
* Approximate, and varies with battery charge state. Approx.
3.4v fully charged.
** Approximate
PROTOVAPOR
XPV/XPV MINI
