User’s Manual
Proton Stick V2
Portable USB Flash Disk
3
Driver Installation
A. Installation Procedure for Win 98 / 98se
1. Do
NOT
plug in the
Proton Stick V2
.
2. Insert CD driver disc and run “X:\driver\Setup.exe”. (Letter “X” refers to the
CDROM drive location.)
3. Click “Start” button.
4. Plug in
Proton Stick V2
into the computer USB port and Windows will install the
driver automatically.
5. Afterwards, in “MY COMPUTER” you will find a new icon “REMOVABLE
DISK”. This is the location of
Proton Stick V2.
6. Now, you are able to access all features that provided by
Proton Stick V2
.
** Please also read “UTILITIES” in this installation quick reference.
B. Installation Procedure for Win Me / Win 2000 / Win XP
There is
Proton Stick V2
driver support in Win Me / Win 2000 / Win XP. After you
plug in
Proton Stick V2
Windows will automatically install the driver. Just follow
the simple installation procedure, and finally, in “MY COMPUTER” you will find a
new icon “REMOVABLE DISK”.
For using security and partition functions, etc, ‘Manager’ application should be
installed. Insert CD driver disc and run “X:\manager.exe”. (Letter “X” refers to the
CDROM drive location.)
** Please also read “UTILITIES” in this installation quick reference.
** To “Uninstall”
Proton Stick V2
, plug off from the USB port.
C. Linux
For Linux, you can use the following instructions to mount the USB disk on.
1. Execute cd /etc/sysconfig (cat /etc/sysconfig/hwconf |more)
2. Check the device information in hwconf and write down the mount point (e.g.
/dev/sda)
3. Make a directory in /mnt (e.g. mkdir /mnt/flashdisk)
4. Mount the device on (e.g. mount /dev/sda/mnt/flashdisk if mount point is
/dev/sda)
