Page 30 of 68
Proton Products InteliSENS PD30 Instruction Manual (Issue 1a)
- The industrial communication bus type.
- Set the device ID of the gauge.
- Select the DeviceNet baud rate from options: 125K; 250K;
500K.
- Set the Profibus ID of the gauge then click the
“OK” button
to confirm.
- Enable or disable the DHCP function.
- Set the Endian mode.
Press the
button to return to the home page.
Press the
button to access the function menu page.
Press the
button to advance to the next page.
- Enter the gauge IP address.
- Enter the subnet mask of the network.
- Enter the gateway IP address of the network.
Press the
button to return to the home page.
Press the
button to access the function menu page.
Press the
button to advance to the next page.
