Proton ICS-1290 Скачать руководство пользователя страница 2

Страница: 2 / 115

Precautions

Please read all the contents of the manual carefully before using theproducts

described in this manual. Please read the following precautions carefully toensure

that the barcode scanner is safe to use according to the design specifications,and

please carefully keep the manual for future reference.

All software (including firmware) provided to the user with the barcode

scanner is protected by copyright.

The manufacturer reserves the right to make changes to the software

(including firmware) to improve the stability or other performance ofthe

barcode scanner.

The contents of this manual are subject to change without notice.

The manufacturer is not responsible for any loss or claim arising from theuse

of this manual by a third party.

Do not throw or drop the barcode scanner or subject it to strong impact.

Doing so can damage the part, abort the execution of the program, causethe

memory contents to be lost, or interfere with the normal use of thebarcode

scanner.

Use only your fingertips or blunt instruments to operate the switch button.

Using a pointed object can damage the buttons and cause a short circuitin

the internal circuitry.

When the temperature suddenly changes, condensation may form on the

outer casing of the barcode scanner. If you run a barcode scanner at this

time, it may affect normal work. Therefore, care should be taken to avoid

environments that may cause condensation. If condensation forms frost,wait

until it is completely dry before using the barcode scanner.

Содержание ICS-1290




















































































































Результаты поиска

Содержание ICS-1290

Отзывы:

Похожие инструкции для ICS-1290

Бренды по названию

Популярные бренды

Proton ICS-1290, Руководство пользователя

Результаты поиска

Содержание ICS-1290

Отзывы:

Похожие инструкции для ICS-1290

Бренды по названию

Популярные бренды