between the available modes. Once the desired mode is
reached, tap the
OK
button to return to the main menu.
As a shortcut,
Custom modes 1-4
can be selected by
double-tapping the
MODE
,
CLR
,
PWR
, or
TMR
buttons
respectively. For instance double-tapping
CLR
will bring
you instantly to
Custom mode 2
.
WHITE PRESETS mode
Use this mode to select from preset shades of white.
COLOR PRESETS mode
Use this mode to choose from several preset colors such
as red, yellow, green, etc.
HUE/SATURATION mode
Use this mode to choose a color by it’s hue and
saturation.
RGB mode
Use this mode to choose a color by its individual
red/green/blue components.
CUSTOM modes
These modes are user configurable to any of the
supported colorspaces.
Color selection (CLR)
This device supports choosing colors using one of four
different colorspaces. The color menus are context
sensitive, meaning the options will depend on the active
colorspace. Please determine the active colorspace
(displayed in lower left corner of LCD screen) and refer to
the appropriate sub-section below:
WHITE
– To choose a different shade of white, tap the
CLR
button and turn the
KNOB
to cycle through the
available choices. Once you have found the shade you
want, tap the
OK
button to return to the main screen.
COLOR
- To choose a different preset color, tap the
CLR
button and turn the
KNOB
to cycle through the
available choices. Once you have found the color you
want, tap the
OK
button to return to the main screen.
HUE
– Allows choosing the hue and saturation of a color.
To choose a color, tap the
CLR
button to enter the hue
selection screen. Turn the
KNOB
to cycle between the
available hues. After you have found the desired hue,
tap the
OK
button to advance to the saturation
selection screen. Turn the
KNOB
to cycle between 0-
100% saturation. Once you have reached the desired
saturation, tap the
OK
button once again to return to
the main screen.
RGB
– Allows choosing a color by setting the relative
intensities of its RGB components. To begin selection,
tap the
CLR
button and then turn the
KNOB
to adjust
the red intensity. Once you have found the desired
intensity, tap the
OK
button to advance to setting the
green intensity. Repeat for blue intensity. Tap the
OK
button once again to return to the main screen.
NOTE
– The colorspace for
Custom modes 1-8
can be
changed for each mode. To set the colorspace of the
current mode, press and hold the CLR button for at least 2
seconds before releasing. This will bring up the
colorspace selection screen. Turn the
KNOB
to cycle
between the available colorspaces and press the
OK
button to make your selection.
Power level (PWR)
To change the power output for the current mode, tap the
PWR
button to enter the power adjustment screen.
Turning the
KNOB
clockwise will increase the output in
0.1 stop increments, while turning it counter-clockwise will
reduce output in 0.1 stop increments. The power level is
adjustable from 1.0 to 9.0 (min to max respectively).
Once your selection is complete, tap the
OK
button to
return to the main screen.
Timer duration (TMR)
Each mode can be set to stay on for a specific amount of
time. This feature allows the delivery of an accurate and
repeatable amount of light. The duration is similar in
concept to the “shutter speed” on a camera. The longer
the duration, the more light is delivered, and the brighter
your exposure will be.
To change the exposure countdown timer for the current
mode, tap the
TMR
button to enter the timer adjustment
screen. Turn the
KNOB
clockwise to increase the
duration, or counter-clockwise to reduce the duration.
The duration is adjustable in 1 second increments
between 0-100 and in 10 second increments between
100-999 seconds. Turning the
KNOB
fully counter-
clockwise to the
(infinity) symbol disables the
countdown timer, meaning the light stays on until it is
manually shut off. Once your selection is complete, tap
the
OK
button to return to the main screen.
NOTE: The new timer value will not become active until
the next time the lamp is switched on using the
MAIN
power button.
Backlight operation (BACKLIGHT)
The LCD is backlit for use in dark environments. By
default, the backlight is set to
AUTOMATIC
mode. It will
turn on automatically when it detects user input, and it will
switch off when it becomes idle. To enable/disable the
backlight, tap the
BACKLIGHT
button at any time to
toggle the backlight on/off.
The backlight can also be set to
MANUAL
mode where it
turns on for a fixed amount of time each time the
BACKLIGHT
button is pressed. To change backlight
operation to
MANUAL
mode, press and hold the
BACKLIGHT
button for at least 2 seconds before
releasing. This will bring up the backlight screen. Turn
the
KNOB
to select between
MANUAL
and
AUTOMATIC
mode. Once your selection is complete, tap the
OK
button to return to the main screen.
CARE AND MAINTENANCE:
Cleaning
If the LED Light becomes dirty or needs cleaning, the
exterior surfaces can be wiped clean with a soft dry cloth.
Never use water, solvents, or chemicals as this may
damage the device. Never use paper towels or other
abrasive materials on the front lens, control panel, or LCD
screen as this may scratch the finish.
Storage and transport
Always disconnect the battery when not in use or prior to
transport. Although the LED Light will automatically enter
standby mode when inactive, the electronics will still
consume a tiny amount of electricity and may drain the
battery over time.
If the LED Light is switched on in a confined space (such
as in a bag or the trunk of a car), the lack of ventilation
and cooling may lead to overheating, possible burns or
fire.
Always store the LED Light in a cool and dry location
away from direct sunlight.
LIMITED WARRANTY
Before using this product, please read this warranty
carefully. By using your ProtoMachines LED Light, you
agree to this warranty. If you do not accept this warranty,
do not use your ProtoMachines LED Light.
The ProtoMachines LED Light is warranted to the original
purchaser to be free from manufacturing and component
defects for one (1) year from the date of purchase. This
limited warranty is the sole and exclusive remedy, offered
in lieu of all other warranties, expressed or implied.
ProtoMachines
has
sole
discretion
to
determine
manufacturer’s defects and will (at its option) repair or
replace it, or refund the purchase price. Repair may use
new or refurbished parts. Replacement may be with a
new or refurbished unit.
ProtoMachines will not be liable for any indirect,
incidental, or punitive damages arising from use of this
product.
This warranty does not cover normal wear and tear, or
damage to or from any non-ProtoMachines product used
in connection with this product. This warranty does not
apply to damage caused by accident, abuse, misuse,
modification of the product, or external causes such as
acts of nature.
