Freeway 3112 Hardware Installation Guide
Chapter 5. Configuring the Boot Parameters Using the Local Console
2) Display Boot Parameters
3) Edit Boot Parameters
Select:
5. Select option 3 to edit the boot parameters. The system displays the parameters one at a time. Three actions are
possible as each parameter is displayed:
•
To preserve a parameter, press
<
return
>
•
To edit a parameter, type the new alpha-numeric information and press
<
return
>
•
To clear a parameter, press the period key (‘.’) followed by
<
return
>
Figure 5-2
shows an example of a Freeway System Boot Parameters screen.
Figure 5-2. Example of the Freeway System Boot Parameters (Local Console)
Freeway System Boot Parameters
---------------------------
Boot Device
: fei
Processor Number
: 0
FTP User Name
: freeway
FTP Password
: password
Flags
: 0
Freeway Server Name
: freeway1
Freeway Inet Address
: 207.67.135.224
Freeway Subnet Mask
: ffffff00
Boot Server Name
: bootmaster
Boot Server Inet Address
: 207.67.135.198
System Boot Directory
: /usr/local/freeway/boot
System Boot File Name
: fw486
Configuration File Name
: bootcfg.pci
Secondary Net Interface
:
Gateway Inet Address
:
6. Configure the boot parameters as described in
Table 4-1
.
7. After you have entered the last parameter (Gateway Inet Interface), the screen displays:
Save modifications?
Enter ’yes <return>’ to save modifications.
Enter ’no <return>’ to prevent modifications.
If all of the parameters have been entered correctly, enter yes; otherwise, enter no.
If you enter
yes
, the screen displays the following message, and the system returns to the Freeway Boot System
Main Menu after data storage completes:
Protogate DC-900-2016A
23
