manualshive.com logo in svg

Protocol Dronium One AP, Инструкция по эксплуатации, Страница: 21 / 23

Поделиться
Скачать
Protocol Dronium One AP Скачать руководство пользователя страница 21

SHOOTING PHOTOS AND VIDEO

1. Turn on the drone, synchronize, and calibrate.

2. Photo: Push the Photo button and the camera will take a photo. The red 

indicator on the back of the drone will flash once as it’s taking the picture.

3. Video: Push the Video and the camera will begin to record. The red indi-

cator will continuously flash while recording video.  Push the Video button 

again and the camera will stop recording.  

4. Connect the USB transfer cable to the drone and plug it into the USB 

port of your computer.  If you are using Windows, the USB will come up 

on the removable drive.  If you are using OS, then the USB will come up as 

“Untitled”.

5. Open the drive and then open the Video or Photo folders to access the 

.AVI or JPEG files.

6. .AVI movies can be played in several different formats including Quick-

time, Windows Media Player, and RealPlayer.

WARNING: Never remove the card from the video camera while the drone 

is turned on

Содержание Dronium One AP
























Отзывы:

Нет отзывов