ProtoCessor ProtoNode LER, Руководство для стартапов

Страница: 37 / 38

Harsco Industrial Patterson-Kelley ProtoNode Startup Guide Page 37 of 38
ProtoCessor 1991 Tarob Court Milpitas, California 95035 USA Web : www.protocessor.com
Tel : (408) 964 4444 Fax : (408) 964 4425 Toll Free : (800) 317 8319 email : support@protocessor.com
Appendix C. Reference
Appendix C.1. Specifications
ProtoNode RER ProtoNode LER
Electrical
Connections
One 6-pin Phoenix connector, one RS-485
+/- ground port, power +/- frame ground
port
One 3-pin RS-485 Phoenix connector, one
RS-485 +/- ground port
One Ethernet-10/100 Ethernet port
One 6-pin Phoenix connector, one RS-485
+/- ground port, power +/- frame ground
port
One Ethernet 10/100 BaseT port
One FTT-10 LonWorks port
Approvals:
Pending CE (EN55022;EN55024; EN60950), UL916, Pending FCC Class A Part 15, DNP3
Conformance Tested, OPC Self-tested for Compliance, RoHS Compliant, CSA 205 Approved
BTL Marked
LonMark Certified
Power
Requirements
Multi-mode power adapter: 9-30VDC or 12 - 24VAC
Physical
Dimensions
11.5 cm L x 8.3 cm W x 4.1 cm H (4.5 x 3.2 x 1.6 in.)
Weight: 0.2 kg (0.4 lbs)
Operating
Temperature:
-40°C to 75°C (-40°F to167°F)
Surge Suppression EN61000-4-2 ESD EN61000-4-3 EMC EN61000-4-4 EFT
Humidity: 5 - 90% RH (non-condensing)
(Specifications subject to change without notice)
Appendix C.1.1. Compliance with UL Regulations
For UL compliance, the following instructions must be met when operating the ProtoNode.

The units shall be powered by listed LPS or Class 2 power supply suited to the expected operating
temperature range.

The interconnecting power connector and power cable shall:

Comply with local electrical code.

Be suited to the expected operating temperature range.

Meet the current and voltage rating for the ProtoNode/Net

Furthermore, the interconnecting power cable shall:

Be of length not exceeding 3.05m (118.3”)

Be constructed of materials rated VW-1 or FT-1 or better

If the unit is to be installed in an operating environment with a temperature above 65 °C, it should be
installed in a Restricted Access Area requiring a key or a special tool to gain access

This device must not be connected to a LAN segment with outdoor wiring.