2
To
Blank the Shotclock
displays press the HIDE SHOT button.
To
Adjust the Shotclocks
(the game clock must be stopped) use the SHOTCLOCK ADJUST
up/down arrows.
To
Adjust the Game Clock
while stopped, use the MAIN CLOCK ADJUST up/down arrows.
To
Sound the Horn
at any time press the HORN button.
To manually advance to the
Next Period
display press the NEXT PERIOD button to change the
period number displayed. The display will indicate ‘
P1
’, ‘P10’, etc. Note this does not relate to
or modify any times, they are changed separately.
During an interval the display will indicate ‘
Int1
’, ‘
Int2
’, etc.
Press LOAD
PERIOD TIMER
to load a pre-configured period timer. Eg press once loads the
first pre-set period time, tap again to cycle through a number of pre-set period timers. The
pre-set period times are set in the edit menu (described later).
Press LOAD
INTERVAL TIMER
to load a pre-configured interval timer. This works the same as
the period timers.
Game Operation
Period Game Timer
Five pre-configured period times are provided.
The horn shall sound automatically when:
•
The game time reaches zero
•
The shot-clocks reach zero
•
The horn button is pressed on the controller
During a game the shot-clocks shall never show a greater time than the remaining time on the
game clock.
The shot-clocks only count when the game-timer is running. The shot-clocks are reset to 30
every time the “Reset-shot” button is pressed. There is no ability to independently start or
stop the shot-clocks
Time-outs Timer
Time-outs are only operational during a game period (not required during and interval).
If the time-out button is pressed while the game time is running, the game time is paused,
and the time-out automatically starts counting down from a preconfigured time. A horn shall
sound when 15 seconds are remaining, and again when zero is reached.
Interval Timer
Five pre-configured interval times are provided. A horn shall sound when 30 seconds are
remaining, and again when zero is reached.
Содержание P10
Страница 4: ...4 ...
