background image

Scanner

LED Indicator

Power Override

Hole

Fingerprint 
Scanner

Wake-Up

Button

1.  To close the safe, push and hold the door shut, press the 
     wake-up button and wait until the safe is locked.

Note

: You will hear the bolts extending and locking the safe

To delete fingerprints (users), 

go to

: Initialization Process

You cannot delete individual users. You must delete
all users.

1.  

Open the safe by following step 1.

2.  Press the red setup button located inside the safe
     on back of door (see diagram).The scanner will flash red
.
3.  While the scanner flashes red immediately place your finger
      (preferably your index) flat on the fingerprint scanner
      wait until the scanning process is done and the green LED goes 
      on  twice with two beeps.

4.  Remove your finger from the scanner, your fingerprint is now enrolled.

NOTE:

 To add additional fingerprints, repeat step 3.  You can enroll up to

              30 different fingerprints.

1.  

Open the safe and leave the door open

2.  Remove one of the batteries from the battery box inside the safe
3.  Press and hold the wake-up button for 3 seconds and release.
4.  Press and hold the red setup (programming ) button, while holding
     the button insert the battery back into the battery box.
5.  Keep holding the red setup button until the LED indicator flashes 
      green twice with 2 beeps.
7.  Release the setup button and the safe is now initialized back to factory 
     settings.  Now any fingerprint can open the safe

Step 2. – Closing the safe.

Initializing: Restoring Factory Setting

Deleting:

Step 3. – Enrolling fingerprints.

page 2

page 3

(continue next page)

Please use this key only if the scanner is not reading your 
fingerprint for some reason.
DO NOT use this key to open the safe on a regular bases. 
To use the key, gently unscrew the chrome keyhole cap located
below and left of the scanner. Insert the key with the notch 
pointing upwards and turn counter-clockwise to open the safe.
NEVER LOCK THE KEYS INSIDE THE SAFE.  ALWAYS KEEP 
THE KEYS OUTSIDE OF THE SAFE IN A HIDDEN PLACE.

Using the Emergency override key:

Setup Button

Отзывы: