Control Unit
1
Position the CCU by aligning the location aper-
tures (
x
) on the back of the CCU over and down onto
the CCU location pins (
B
).
Battery Pack
1
Attach the fixing plates (
y
) to the back of the bat-
tery pack using the nuts and bolts provided.
2
Align the fixing plates to the fixing brackets (
E
).
3
Secure the battery pack in place using the nuts
and bolts provided.
Accessory Box
The accessory case supplied with your PROTEUS
™
inspection system
should be positioned into the accessory box tray (
F
).
Cable Reel RMP100-RMP200
1
Position the cable reel onto the bottom section of the trolley.
2
Align the hole at the base of the brake side of the cable reel with the
hole in the cable reel fixing bracket (
G
). Align the hole at the base of the
opposite side of the cable reel with the cable reel fixing bracket (
Gi
) for
RMP100 or (
Gii
) for RMP200.
3
Secure the cable reel to the brackets using the nuts and bolts
provided.
• See page 6 Portable Storage Trolley Equipped
Information and Care
Maintenance
Ensure that trolley frame and wheels are free from debris and dirt.
*When purchased with a system
Equipping PTP01 Portable Storage Trolley
The PTP01 Portable Storage Trolley is delivered fully equipped* from the
factory. Should you need to remove, then replace any of the equipment,
please follow the instructions below.
(
x
)
(
y
)
5
Version B
Minicam
Proteus