FUNCTION AND OPERATIONS
AUTO ON/OFF
The monitor will wake up automatically if the exercise machine is in motion. If stop exercising for over 4 minutes,
monitor will turn off and reset all function values to zero.
SCAN
Press the button until the SCAN display on the screen. Monitor will display the following function and each
function will keep 6 seconds on the screen. Scan – Time – Calorie – Pulse – RPM – Count.
TIME
Press the button until the Time display on the screen. Monitor will display the Time function on the screen.
Count up:
Without setting the time value, the monitor will count up the time from 00:00 ~ 99:59.
Count down:
Setting the exercise time from 1:00 ~99:00 minutes, the monitor will count down from your setting values. Once
reach setting value, monitor will alarm.
RPM
Press the button until RPM display on the screen. Monitor will display step per minute on the screen.
CALORIE
Press the button until CAL display on the screen. Monitor will display accumulate the calorie consumption.
Count up:
Without setting the calorie value, the monitor will count up from 0.1 ~ 999.9
Count down:
Setting the calorie from 1.0 ~ 999.0, the monitor will count down from your setting values. Once reach setting
value, monitor will alarm.
PULSE
Press the button until the
♥
display on the screen. The monitor will display your current heartbeat in beats per
minute. The monitor is setup hand pulse detected system. Place the palms of your hands on the both of the contact
pads and the monitor will show up your heartbeat rate in beat per minute (BPM) on the LCD display. If there is any
difficulty in detecting signals, please rub your hands gently to improve blood circulation. The pulse display value is
between 40 to 240 BPM.
Pulse limit:
Setting the value of pulse limit between 90 to 220, the monitor will measure your heartbeats. Once reach setting
value, monitor will alarm twice every 6 seconds until your heartbeats under your setting value.
