Computer Manual - Proteus ISS-500
KEY GUIDE:
MODE
1. Select function and display on the screen during exercise.
Scan – Time – Calorie – RPM – Count.
2. Press this button to confirm the setting values of time, calorie and count.
3. Hold two seconds to reset all of values to zero.
UP
Increase the setting value of the following functions.
Time – Calorie – Pulse – Count.
DOWN
Decrease the setting value of the following functions.
Time – Calorie – Pulse – Count.
ENTER
1. Press this button to enter setting mode.
2. Select function to be preset.
Time – Calorie – Pulse – Count.
3. Press this button to confirm the setting values of pulse.
BATTERY REPLACEMENT:
1. Please install 2 pcs AA or UM-3 batteries in the battery case on the back of monitor.
2. Ensure that the batteries are correctly fitted. Battery must be correctly positioned and make sure the battery
spring is properly contacted with battery.
3. Should the displays appear blank or display only partial segments remove the batteries, wait 15 seconds, and
then replace again.
4. Whenever remove batteries, all the functional values will be to zero.
