DAVIT
INSTRUCTION MANUAL
EN 795:2012 Class B
Reference number:
RJ200
BEFORE USE READ THIS MANUAL CAREFULLY
edition: 3/25.02.2019 pl
p. 4
SAFETY INSTRUCTIONS
General information
The device RJ200 is designed to be used only for purposes described in this instruction manual. It is designed to
provide safety when working on a height during loading or unloading of vehicles and levellers.
•
The product must not be used to lift or handle any loads.
•
Do not modify or replace any components of the devices on your own, as this may affect characteristics of the
device and the user’s safety.
•
Be particularly careful when handling the device from one location of its use to another. If any damages to the
product are found, the affected part must be replaced.
•
It is necessary to draw a rescue plan for the location where the device is to be used in case if the device RJ200
arrests a fall.
•
It is recommended to use an additional line for lowering of snap hook of retractable type fall arrester to avoid
continuous tension of winding spring of the device.
Inspection of products and devices before use
Before installation of the device always check whether all components are complete and in operating condition. Please
check if the elements are not damaged or corroded.
Never use damaged or corroded elements, as this may affect the user’s safety.
Prohibition against modification of the device
Do not replace original elements of the devices for other that are not designed for this device.
Never modify or repair the original elements of the device on your own.
Obligation to use individual fall protection equipment when installing the device
Always use individual fall protection equipment during installation of the product, when risk of a fall from a height is
present. This also applies to working on aerial work platforms (“manlifts”).
UŻYWAJ SZELEK
BEZPIECZEŃSTWA
USE FULL BODY HARNESS
