manualshive.com logo in svg

ProtekRC Prodigy 620 DUO, Инструкция по эксплуатации

Поделиться
Скачать
ProtekRC Prodigy 620 DUO Скачать руководство пользователя страница 8

· 07

WARNING AND SAFETY NOTES

These warnings and safety notes are particularly important. Please follow the 
instructions for maximum safety; failure to adhere to these instructions may 
damage the charger and/or battery and may cause a fire.

Never leave the charger unattended when connected to its power supply. If any 

malfunction occurs, TERMINATE THE PROCESS AT ONCE and refer to the 

instruction manual.
Keep the charger well away from dust, moisture, rain, heat, direct sunshine and 

vibration. Do not drop the Prodigy 620 DUO.
The correct input voltage is 12-18V DC
Both the charger and battery should be put on a heat-resistant, nonflammable, and 

nonconductive surface when in use. Never place these items on a car seat, carpet 

or similar surface. Keep all the inflammable and volatile materials away from the 

operating area.
Make sure you know the specifications of the battery to be charged or discharged 

to ensure that it is compatible with this charger. If the charging program is set up 

incorrectly the battery and/or charger may be damaged; this can cause fire or 

explosion due to overcharging. ProTek R/C is not responsible for any damage or 

subsequent damage arising as a result of misuse or failure to observe the 

procedures outlined in this manual.

Standard Battery Parameters

3.7V/cell

Nominal

Voltage 

Min. Discharge

Voltage  

Max Charge

Voltage  

Storage

Voltage  

Allowable

Fast Charge 

3.7V/cell

4.2V/cell

3.8V/cell

≦

1C

≧

3.0V/cell

LiPo

Li-Ion

3.6V/cell

4.1V/cell

≧

2.5V/cell

≦

1C

3.3V/cell

3.6V/cell

3.3V/cell

≦

4C

≧

2.0V/cell

LiFe

1.2V/cell

1.5V/cell

n/a

1C-2C

≧

0.85V/cell

NiCd

1.2V/cell

1.5V/cell

n/a

1C-2C

≧

1.0V/cell

MiMH

2.0V/cell

2.46V/cell

n/a

≦

0.4C

≧

1.75V/cell

Pb

Be very careful to choose the correct voltage indicated voltage for each type of battery. 

Failure to do so may cause damage to the battery, including fire or explosion.

Содержание Prodigy 620 DUO

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды