Surge protection: To L-N only
Clamping voltage: L-N = 500 volts
UL-1449 certified
FCC and IEC certified
SAFETY INFORMATION
RISK OF ELECTRIC SHOCK – Use only in dry locations and only indoors.
DO NOT plug into another relocatable power tap.
DO NOT “daisy chain” surge protectors.
DO NOT plug into 220V outlet or power source
DO NOT use with any aquarium equipment.
DO NOT use if correctly grounded outlets are not available
DO NOT install this device if there is not at least 30 feet (10 meters), or more of wire
between the electrical outlet and electrical service panel.
This device features internal protection that will disconnect the surge protective
component at the end of its useful life, but will maintain power to outlet – WHICH WILL
BE UNPROTECTED. If you don’t want your equipment at risk, follow the manufacturer’s
instructions for replacing the device.
DO NOT use in any circumstance that would affect the operation or reliability of life
support equipment, any medical applications, or patient care.
FCC and IEC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Label Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1.
This device may not cause harmful interference, and
