Standard 16 PGM Output Expander
PRT-PXS16
Installation Manual
1.0 Introduction
The Protégé System is an advanced technology security
system specifically designed to enhance the functionality
of security, building automation and access control by
providing a complete integrated solution with local
monitoring and offsite communication.
The Standard 16 PGM Output Expander allows the
expansion of the protégé system by 16 open collector
transistor outputs.
2.0 Configuration
The Standard 16 PGM Output Expander must be
configured with an address before it will communicate with
the Protégé System.
Device Address
The switch positions 1 to 7 select the device address from
1 to 128. When setting an address the Standard 16 PGM
Output Expander must be powered down and restarted for
the new address to take affect.
When changing the address the Standard 16 PGM Output
Expander will automatically default the internal
configuration and require a network update. See the
Protégé System reference manual for information on
performing a module update.
Figure 1 - Configuration Switch Settings
The configuration switch image on the right
shows the address setting for device address
008. The configuration switch on the left
shows address 001 (Default).
3.0 Communication
Support for up to 128 PGM expanders per system
controller is provided. The Protégé System uses a high
speed encrypted RS-485 communication interface.
Figure 2 - Network Communications
4.0 End Of Line Termination (EOL)
The end of line (EOL) jumper should be ON when the
Standard 16 PGM Output Expander is located at the start
or end of the module network.
Figure 2 - EOL Jumper Settings
Figure 3 - EOL ON Figure 4 - EOL OFF
5.0 Zone Input
The Standard 16 PGM Output Expander does not have any
provision for interfacing to zone input devices. For
expansion of zone inputs in the Protégé System refer to
the PRT-ZXS16 and PRT-ZX16 installation manuals.
6.0 Programmable Output
A PGM is a programmable output that can be activated
and deactivated based on specific events or functions
within the Protégé System. The primary function of the
Standard 16 PGM Output Expander is to activate any one
of the 16 onboard PGM outputs.
PGM
Function
PXXXX:01 P1 Open Collector PGM Output.
PXXXX:02 P2 Open Collector PGM Output.
PXXXX:03 P3 Open Collector PGM Output.
PXXXX:04 P4 Open Collector PGM Output.
PXXXX:05 P5 Open Collector PGM Output.
PXXXX:06 P6 Open Collector PGM Output.
PXXXX:07 P7 Open Collector PGM Output.
PXXXX:08 P8 Open Collector PGM Output.
PXXXX:09 P9 Open Collector PGM Output.
PXXXX:10 P10 Open Collector PGM Output.
PXXXX:11 P11 Open Collector PGM Output.
PXXXX:12 P12 Open Collector PGM Output.
PXXXX:13 P13 Open Collector PGM Output.
PXXXX:14 P14 Open Collector PGM Output.
PXXXX:15 P15 Open Collector PGM Output.
PXXXX:16 P16 Open Collector PGM Output.
