Protector AS-410, Руководство по эксплуатации

Страница: 17 / 24

EN
17
TEACh IN FURThER
RAdIO TRANSmITTERS
(mAX. 8 PIECES)
NOTE
Further radio transmitters can only be used in
the “oR” function! i.e. window “1” oR window
“2” (3-8) can be opened to activate exhaust
air control.
1. Insert a battery (CR 2032) with the correct polarity
into the NEW radio transmitter to be taught in and
slide the switch
(7) in position “I” to switch on the
radio transmitter. The LED (5) on the radio transmit-
ter lights up briefly.
2. Press the button (4) on the radio receiver for
3 seconds. The LED (4) starts flashing and the radio
receiver is in learning mode for 30 seconds. During
this time, another radio transmitter can be taught in
to the radio receiver.
3. Actuate the radio transmitter within these
30 seconds by holding the magnet (3) once against
the radio transmitter (2) at the height of the arrow
mark and removing it again. The LED (5) on the radio
transmitter lights up. At the radio receiver, the LED (4)
stops flashing and the teach-in process is completed.
4. Repeat steps 1), 2) and 3) for each individual
radio transmitter.
5. Once a maximum of 8 radio transmitters had been
taught in, no further transmitters can be added
dELETE INdIVIdUAL OR ALL
RAdIO TRANSmITTERS
(mAX. 8 TRANSmITTERS)
deleting a single RAdIO TRANSmITTER
1. Press the button (4) on the radio receiver for
3 seconds. The LED (4) starts flashing.
2. Actuate the radio transmitter to be deleted by
holding the magnet (3) once against the radio
transmitter (2) at the height of the arrow mark
and removing it again. At the radio receiver, the
LED
(4) stops flashing and the deletion process
for the individual radio transmitter is completed.
delete all RAdIO TRANSmITTERS
(factory setting)
1. Press the button (4) on the radio receiver for
3 seconds. The LED (4) starts flashing.
2. Press the button (4) again for 3 seconds. At the
radio receiver, the LED (4) stops flashing and the
deletion process for all radio transmitters
is completed.