Protecto F-SAFE SST 1/6 F90, Инструкция по установке и эксплуатации

Страница: 62 / 108

Optional accessories
61
13.6.4 Troubleshooting
Fault Cause Remedy
Device not working No power
Fuse defective
Device defective Check the mains voltage
Replace the fuse of the mains connector
Send in the device
Red flow lamp ON Dust filter clogged
Volume flow interrupted Replace the coarse filter
Replace the fine filter
Remove the obstruction from the exhaust vent
Red saturation lamp ON,
audible signal, air flow
interrupted Activated carbon filter saturated
Concentration of hazardous
substances too high
Other hazardous substances
contained in exhaust air Replace the filter
Check the contents of the cabinet and remove
any leaked substances
Start up the device again (authorised persons
only)
Contact the supplier
13.6.5 Specifications, characteristics
Model : SST-UL
Ventilation system : RCRv75/2m
Flow : 10 to 25 m³/h
Total pressure : Max. 250 Pa
Sound level : 38 dB(A) at a distance of 3 m
Monitored parameters : - Flow
- Saturation of activated carbon filter
LEDs : ROT = Error, GREEN = Service
25 / 50 / 75%
Ambient concentration
Signal outputs : - Potential-free for flow
- Potential-free for saturation of
activated carbon filter
Contact power : 230 V / 8 A
Power supply : 230 V / 50 Hz
Current consumption : Max. 0.5 A
IP protection : II 3/-G Ex ec IIC T4 Gc
PTB 21 ATEX D137
Frequency : 50 Hz
Motor protection : PTO 90°C
Weight : 20 kg