4G Modem
13
1.6 Hardware Installation
This chapter describes how to install and configure the hardware
1.6.1 Mount the Unit
The
IDG400 series can be placed on a desktop, or use extender to place on DIN-Rail bracket or mount on the
wall.
1.6.2 Insert the SIM Card
WARNING: BEFORE INSERTING OR CHANGING THE SIM CARD, PLEASE MAKE SURE
THAT POWER OF THE DEVICE IS SWITCHED OFF.
SIM card slot is located in the middle area of IDG400
series. You need to remove the outer SIM card
cover before installing or removing an inserted SIM card. Please follow below instructions to install or remove
a SIM card. After SIM card is well installed or removed, put back the outer SIM card cover.
Step 1: Remove SIM cover
Remove the SIM cover from
left side.
Step 3: Insert a SIM
Push the SIM card into the
SIM slot.
Step 2: Remove SIM
Push the inserted SIM card
to eject the SIM card.
Step 4: Put Back SIM cover
Put back the SIM cover
