Protective Enclosures Company TV Shield Pro 2015 Скачать руководство пользователя страница 13

13

The TV Shield 

PRO

® Limited Product Warranty

This limited warranty is provided by Protective Enclosures Company, LLC for The TV Shield 

PRO

® product(s) 

identified by the purchaser’s registration as indicated below.  This limited warranty is between Protective 

Enclosures Company, LLC and the registered purchaser of the product.  There are no other warranties, express or 

implied, except as required by law, including warranties of merchantability and fitness for a particular purpose, 

that are provided for herein; however, all such implied warranties, if any, are limited to the duration of this specific 

limited product warranty. Some states do not allow limitations on how long an implied warranty lasts, so the 

above limitations may not apply to you.

The TV Shield 

PRO

® Limited Product Warranty:

 

*  5 Year Limited Warranty on the aluminum front frame and steel back plate.

 

*  2 Year Limited Warranty on the anti-glare polycarbonate or polycarbonate front shield (cover/panel/window) 
against cracking or breaking with normal consumer use. This warranty does not cover any scratches or damage 
caused by abuse or abnormal use; it only covers against discoloring, cracking, yellowing, or breaking of the 
polycarbonate or polycarbonate front shield.
*  2 Year Limited Warranty on product failure or quality of workmanship and on all other components against any 

manufactures defects. 

This is a limited warranty, subject to the conditions, limitations and exclusions identified herein. Protective 

Enclosures Company, LLC warrants to the original purchaser of the registered or identified product for a period 

of time listed above, from the date of purchase, that the product shall be free of defects in materials, and 

workmanship, and subject to the limitations set forth below; Protective Enclosures Company, LLC will repair or 

replace, at its option, any defective unit. Protective Enclosures Company, LLC hereby warrants to the original retail 

purchaser of this product that should this product or any part thereof, under normal use and conditions, prove to 

be defective in material or workmanship within the time frame from the original purchase specified above, such 

defect(s) will be repaired or replaced with a new or reconditioned product (Protective Enclosures Company LLC’s 

option) without charge for parts and repair labor. Purchaser must return the product to Protective Enclosures 

Company, LLC, (return receipt requested) or by other means that confirms delivery and Protective Enclosures 

Company, LLC shall make the said repairs or replacement within 60 days of receipt. In some instances the product 

may have been discontinued and cannot be replaced, or repaired. In that instance Protective Enclosures Company, 

LLC shall in its discretion attempt to replace the product with a substantially similar product in a current model 

or design or pay the purchaser a sum for the then fair market value of the product, considering the amount of 

depreciation since sale, and the use of the product. This Limited Warranty is the original retail purchaser’s sole 

remedy for any and all such defect(s).

 

Conditions and Limitations:

Proof of purchase is required (i.e. the sales receipt of other proof of payment). Damage caused by accidents, 

abuse, misuse or modification of the product will render this warranty null and void. This warranty is applicable 

only to the original purchaser and is not assignable or transferable. To obtain repairs or replacement under the 

terms of this warranty, please contact Protective Enclosures Company, LLC at 1-800-331-2628 or visit www.

protectiveenclosures.com. You will need to provide proof of purchase (dated receipt showing where the item 

was purchased) and the product part number in order to receive warranty service. The purchaser is required to 

send the product back to Protective Enclosures Company or to a designated repair center and the purchaser is 

responsible for all charges for shipping and handling. 

P

R

O

Содержание TV Shield Pro 2015

















Отзывы: