6
Feed any extra wire into the wall and mount
the thermostat with the 4 screws and plastic
anchors provided in the box.
7
Check electrical/gas/heat pump guidelines
before you turn the system back on.
8
Restore power to HVAC and all related units.
For units with a C-Wire, check to ensure the
thermostat is powered up before installing
batteries. If no C-Wire, you will need to replace
batteries yearly.
(For additional information on programming and
operating your thermostat, refer to the installation
manual that came with the product).
AA
AA
AA
AA
Wa
ll
Wires
Wall
Anchor
Thermostat
For additional information about your equipment, please visit Protection1.com/start
©2013 Protection One Alarm Monitoring, Inc. All rights reserved.
