protech Yada TRR T33, Инструкция по эксплуатации

Страница: 8 / 44

USE NUT LOCK
Assembly of the REAR gearbox & Center diff. / Montage v/d tandwielkast A & Centraal diff /
Montage des réducteurs AR & différentiel central/ Montierung des Getriebe A & Central
FRONT GEAR BOX
Rear Gear Box
F/H 3mm x 10mm (4)
Differential gasket set
T30.091
Differential shaft
T33.048
90%
Full / Plein / Vol / Voll
OIL (*)
O-rings are for different driving settings (with O-rings = more acceleration)
Bevel gear small 10T
T33.046
O-ring 6x1.5mm
T33.050
Shim ring
3.6x12mm
T33.052
Set screw
5x5mm
MA2056
R/H 3 x 16mm
Rear Sus. Hinge pin Holder ( * )
Drive Joint
T33.003
Shim ring
T30.088
Shim ring
T30.111
Rear Toe In (use 3 degrees to start)
T30.048
Gearcase
T33.011
FH/ST 3 x 40mm
F/H 3 x 20mm
Gearcase
T33.011
Assembly of the Central Differential
FRONT DIFF.
More steering use the ref. SL2500
Standard use the ref. SL5000
Less steering use the ref. SL10000
CENTER
DIFF.
Standard use the ref. SL5000
Quick use the ref. SL10000
acceleration
REAR DIFF. Standard use the ref. SL1000
or use grease
(*) USE ONLY PROTECH SILICONE OIL FOR
BEST PERFORMANCE
F/H 3mm x 40mm (x2)
R/H 3mm x 16mm (x2)
Set Screw 5mm x 5mm (x1)
F/H 3mm x 10mm (x4)
*
TRR RTR = 6061 Alu Rear Sus. Hinge Pin Holder T30.084
TRR PRO = 7075 CNC Rear Sus. Hinge Pin Holder T33.259
High Speed Grease
SL001
8 x 16 x 5 mm
ball bearing
T30.144
Shim ring
T30.088
Pinion Gear small 13T
T33.045