protech Prox-1510 M1, Руководство пользователя, Страница: 63 / 89

Chapter 4 Award BIOS Setup
Page: 4-20
Prox-1510 USER
′
S MANUAL
IDE HDD BLOCK MODE:
Block mode is also called block transfer, multiple commands, or multiple
sector read/write. If your IDE hard drive supports block mode (most new
drives do), select Enabled for automatic detection of the optimal number of
block read/writes per sector the drive can support.
ON-CHIP USB CONTROLLER:
If your system contains a Universal Serial Bus (USB) controller, select enable.
ON-BOARD FDC CONTROLLER:
Select Enable if your system has a floppy disk controller (FDC) installed on
the system board and you wish to use it. If you install and-in FDC or the
system has no floppy drive, select Disabled in this field.
ON-BOARD PARALLEL PORT:
This option allows you to determine access onboard parallel port controller
with I/O address.
PARALLEL PORT MODE:
Select an operating mode for the onboard parallel (printer) port. Select
Normal unless your hardware and software require one of the other modes
offered in this field.