Chapter 4 Award BIOS Setup
Page: 4-20
ISA-562LF USER
′
S MANUAL
VIDEO OFF METHOD:
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank
This selection will cause the system to turn off the vertical
and horizontal synchronization ports and write blanks to the
video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS
Select this option if your monitor supports the Display
Power Management Signalling (DPMS) standard of the
Video Electronics Standards to select video power
management values.
MODEM USE IRQ:
This item enable you to name the interrupt request (IRQ) line assigned to
the modem (if any) on your system. Activity of the selected IRQ always
awakens the system.
SUSPEND MODE:
When enabled and after the set time of system inactivity, all devices except
the CPU will be shut off.
POWER SUPPLY TYPE:
It supports the message,”
It is now safe to turn off your computer
”, to wait
for AT power supply shutdown if the setting of the item is
AT
. In addition, it
won’t show any message if the setting is
ATX
.
SOFT-OFF BY PWR-BTTN:
Pressing the power button for more than 4 seconds forces the system to
enter the Soft-Off state when the system has “hung”. The choices are
Delay 4 Sec and Instant-Off.
WAKE-UP BY PCI CARD:
An input signal from PME on the PCI card awakens the system from a soft
off state.
WAKE UP ON LAN:
When the system enters a Soft-off mode (Standby power exist but system is
not working), it will wake up system when specific signals occurred. The
BIOS monitors the system for “activity” to determine when to enable power
management.
