Chapter 3 Software Utilities
EB-591LF USER
′
S MANUAL
Page:3-3
3-2. INTEL
®
C HIPSET SOFTWARE INSTALLATION UTILITY
3-2-1. Introduction
The Intel
®
Chipset Device Software installs Windows *.INF files to the target system,
and this package contains the drivers for all the interfaces such as USB, SATA, I2C,
SPI of the Intel
®
Platform Controller Hub EG20T with information about a piece of
hardware on the system. These files outline to the operating system how to configure
the Intel
®
chipset components in order to ensure that the following features function
properly:
-
DMA Support
-
GPIO Support
-
I2C Support
-
Packet HUB Support
-
Serial Peripheral Interface (SPI) Support
-
PCIe Support
-
IDE/ATA33/ATA66/ATA100 Storage Support
-
SATA Storage Support
-
USB Support
3-2-2. Installation of Utility for Windows XP/7
The Utility Pack is to be installed only for Windows XP/7 series, and it should be
installed right after the OS installation. Please follow the steps below:
1.
Insert the driver disk into a CD ROM device.
2.
Under Windows system, go to the directory where the Utility driver is located.
3.
Run the application with administrative privileges.