- 17 -
work piece and press the trigger to start welding;
2.6 Carry out the welding operation according to the normal procedure. During
welding process, the welding parameters can be modified according to the actual
situation;
2.7
After welding operation, turn off the power switch and turn off the switch of the
distribution box.
2.8 Schematic diagram of TIG welding process:
No.
Item
No.
Item
1
Welding power
supply
4 Earth clamp
2
Argon gas cylinder
5 Work piece
3
TIG welding torch
3. MMA welding process
3.1. Connect the quick plug of the ground cable, one end of which is connected with
an earth clamp, to the quick socket of the output current “-” pole under the front panel
and turn clockwise to tighten it; then clamp the work piece with earth clamp.
3.2. Connect the quick plug of the welding cable, one end of which is connected
with an electrode holder, to the quick socket of the output current “+” pole under the
front panel and turn clockwise to tighten it; clamp the welding electrode with the
electrode holder;
3.3. Connect the power cord to the distribution box with the corresponding input
2
3
3
4
1
5
Содержание CTM-160
Страница 1: ......
