AC-200A A/C System Maintenance Centre
7
ii.
When the led as
is on, it means that recharge the refrigerant from the
recharging tank (external tank). Otherwise, from the cleaning tank (internal tank).
iii.
It’s by cleaning tank (internal tank) to recharge as default. After fixed the recharging
tank (external tank), you can set to recharge refrigerant from the recharging tank
(external tank). The setting ways is referring to the PARAMETER SETTING.
iv.
When the refrigerant in the recharging tank (external tank) is not enough, please
exchange one tank of refrigerant. The exchanging ways is referring to the
RECHARGING TANK EXCHANGING.
Operations;
A
、
Press the
key to select recharging function.
B
、
The led displays the amount of recharging.
C
、
Set filling amount by press “+” or “-” key, and then press “ENTER” key.
Note: set the filling amount according to automotive user manual. The unit is kg.
D
、
Presses “START” key to run.
E
、
Stop automatically after recharging finished.
Note: In the filling process, if LED displays alternately the remaining amount of
filling and the letters "AC", it means that you need to turn off the HP coupler and
turn on the car air-conditioning to complete the filling process. Later, you should
supply new refrigerant into the tank.
9) Refrigerant supply for the cleaning tank (internal tank)
A
、
Connect the port of fresh refrigerant tank to the HP port of equipment. Block the LP port of
equipment with a cap or LP coupler.
Note: it should connect to the liquid port of fresh refrigerant tank. If has no liquid
port, please invert the fresh refrigerant tank.
B
、
Press and hold the "-" key and power on the equipment at same time. The “Recovery” and
“Kg“indicators will light on, which means refrigerant supply function is on.
C
、
Set supply amount by press “+” or “-” key, and then press “ENTER” key.
D
、
Presses “START” key to run.
E
、
When the LCD display “CLO”, please close the valve of the fresh refrigerant tank.
F
、
Stop automatically after supply finished.